Designed by Graeme Gunn for the Plumbers and Gas Fitters Union and completed in 1971, the union's headquarters beside Trades Hall in Carlton is one of Victoria's finest brutalist buildings, made to read as a rock for the union's strength. At the time, Robin Boyd noted how rare it was for an Australian trade union to be a patron of the arts. Fifty years on, the union is looking ahead again. Its members are the trades that will help retrofit the existing buildings the energy transition depends on. With Kennedy Nolan, Lovell Chen and Hutchinson Builders, the union is renewing its home with an extra floor, a new accessible entrance and a lift, so the building shows the future of the trade as clearly as it once showed its strength.

A 1970s concrete office can run on a quarter of the energy it used.
Insulation, airtightness, better glazing, efficient HVAC and heat recovery cut demand by 42%. A raised rooftop solar array covers most of what’s left.
Efficient fixtures and vacuum toilets halve demand. A 5 kL rainwater tank then supplies the toilets and irrigation through a dual supply, cutting mains water use.

The lowest-carbon building is the one already standing.
Keeping the Graeme Gunn structure means the retrofit carries very little embodied carbon. Operational emissions fall from 103 to 63 tonnes of CO₂e a year.
We came on board with Kennedy Nolan to help the union secure heritage approval for its plans, showing how a heritage building could be insulated, sealed and upgraded without losing its character. Along the way we brought Graeme Gunn back to the building, and he told us it was always designed to take another floor. From there we took it from feasibility through design, approval and construction. We upgraded it with insulation throughout, secondary glazing behind the original windows, heat-pump heating and cooling with heat recovery, rainwater reuse and solar on the new roof, with the plumbing itself put on show. It is targeted to cut energy use by 42% before solar supplies a further third, and to halve its water use.








